*Note: There is a 3 week production lead time on this grip!*

Introducing the Vendetta Grip Pro v2 - Aluminum Polarstar Edition

This is our Latest and Greatest version yet! Aluminum construction mean unparalleled strength! Sandblasted finish for extra grip! Dual door design, and lighter than v1!

We sought out to create a "paintball" style airsoft grip for HPA engine users that didn't break the bank. What we came up with is a simple, but effective grip solution for the competitive player.

The grip angle was moved to near vertical to help squeeze into your cover. This gives a much more natural wrist feel for speedsoft style play. We also included 2 horizontal grip mounting screw holes to attach directly to the sides of the gearbox, strengthening the connection of the grip.

The Vendetta Grip For Polarstar is designed for the Polarstar micro reg 2.

THIS MODEL ONLY WORKS WITH THE POLARSTAR MICRO REG 2 AND IS NOT INCLUDED!

Here are the rundown of all the Features of the Vendetta Grip:

-Aluminum Construction

-Ergonomic Design

-6mm Line adapter included

-Black Oxide Hardware, tools, and spare 6mm hose (in case your current length is too short)

-Affordable Price

-Dual Doors for easy access to hardware

NOTE: while most of the hardware and tools needed to install the grip are included, the user will need to supply a philips head screwdriver for the access door as well as 2 of the long-style gearbox screws for the horizonal grip mount. The grip also requires the 6mm macroline/barb setup for the internal air line (not the steel braid style). An additional length of hose is provided.

The Installation only requires the front most under-mount grip screws to be installed. There are holes for the rear ones if you have the desire to install those, but space is tight and the grip is secure without them.

LEADTIME: Please note these are manufactured to order. As such, there is a 3 week production lead time. Sales are shipped in the order they are received

Setup recommendations:

For most setups using an FCU, we recommend using the Vendetta Snatch grip to house your battery (sold separately) as well as a short signal wire looms (such as the p* 7.5" option) to save space. However, this is mainly for quality of life and ease of battery on/off. There are many setups that can fit all components inside the grip. See below for further recommendations by engine brand:

Wolverine inferno using gearbox housed FCUs (such as Spartan) will have no space issues. Setups using the "premium Fcu", we recommend either a small 2s lipo(sold here) or a relocation of the battery (Vendetta Snatch Grip recommended)

Redline N7/SR-E with FCU will not have issues as long as you use a small 2s lipo as the redline fcu is quite small.

Polarstar setups using the latest LCD FCUs will need either a small 2s lipo (sold here) or a relocation of the battery (Vendetta Snatch Grip recommended). **THE POLARSTAR FUSION MUST HAVE RETAINED ITS STOCK MACROLINE FITTING (ROUNDED ONE). IF YOU HAVE SWITCHED TO AN IGL, MAKE SURE YOU STILL HAVE THIS FITTING. ALSO, THE Fusion IS MISSING 2 OF THE HOLES FOR THE HORIZONAL SCREWS, SO YOU WILL HAVE A VISIBLE HOLE THRU THE GRIP WHERE SCREWS WOULD NORMALLY INSTALL**

All "manual" valve trigger setups (Kythera, Redline milsim, etc) will have no space issues as they have no lipo or FCU

If you have any setup questions not listed here, please feel free to reach out to us on the contact page!